ALATAR

CONTINUOUSLY HINGED OPERABLE WALL ALATAR, WITH AN UPPER SUPPORT TRACK

Wallenium’s soundproof operable wall system ALATAR is ideal for dividing and creating rooms. The foldable wall system is attached to the ceiling and is made up of wall panels that are connected by hinges and stored at the end of the track when opening the wall. There are sound insulation seals between the panels, ceiling and floor.

STRUCTURE
The ALATAR operable wall structure is composed of aluminium profiles, sheets of treated particleboard or MDF and insulation. The combined structure forms a panel that has a total thickness of 82mm and depending on the insulation material ensures a soundproof resistance of 45-49dB.
The operable wall system ALATAR is supported at the ceiling and runs along an adjustable aluminium upper track that is equipped with bearings inside of carriages. This enables the walls height to be adjusted by ±15 mm. The carriages are installed on every second wall panel and are located at the centre of the panel.
At the end of the wall, a jamb profile is installed to close the last panel and which is also used as a door. This, together with the jamb is installed to start the wall and allows for the walls width to be adjusted ±20 mm.
Because the wall hangs from the ceiling, it is important for the installation of the wall that the wall is attached to something solid (i.e. concrete ceiling, steel structure, wood beam etc.).

HARDWARE
Every panel of the folding wall is equipped with a sunken stopper which is used to lock the wall, using a separate handle/knob, into an opening sunk into the floor. The openings sunk into the floor are covered with response plates which are supplied with the wall. The separate panels of the wall are joined with hinges.

SURFACE TREATMENT
The standard colour for the track profile of the folding wall and the jamb profiles is white (RAL 9010) and the panels edge profiles are naturally anodized.

There is a wide variety of panel surface treatments, from which a suitable one can be chosen:

White melamine (standard);
Coloured melamine (RAL and NCS catalogues);
Decorative melamine
Natural veneer
Special solutions (laminate, magnet board, school blackboard, etc.).
As a special solution it is possible to install a glass opening in the centre of the panel. The opening can cover the whole panel, bottom or top. The maximum measurement of the glass is 150 mm in from the sides of the panel and 300 mm in from the top and bottom of the panel.

LOCK AND HANDLE
The last, outermost panel of the folding wall functions as a door when the wall is in a closed position, and is equipped with a roller lock and a sunk handle by Wallenium.
Upon request, a key-lockable lock may also be installed.

Folding wall types:

1) The carrying roller is at the middle of the panel and the folding wall opens in one direction.
[singlepic id=257 w=320 h=240 float=]

2) The carrying roller is at the middle of the panel and the folding wall opens in two directions
[singlepic id=258 w=320 h=240 float=]

Product information:

Thickness: 82mm (for all folding wall types)
Weight m²: 25-45 kg/m² depending on the sound insulation
Height: 4000mm
Panel width: Min 400mm / Max 910mm
Sound insulation: Rw 45-49dB

Come and see a product sample: Wallenium’s office, Vana-Lõuna 39, Tallinn
KT Interior, Vattuniemenkuja 4E, Helsinki

________________________________________________________________________

SINGLE PANELLED OPERABLE WALLS

Single panelled operable walls are room separators that are attached to the ceiling. Unlike continuously hinged operable walls, these panels are not interconnected and when opening the wall the panels are stacked at the end of the track with one roller or on another track with two rollers. There are sound insulation seals between the panels, ceiling and floor.

STRUCTURE
The operable walls structure is composed of aluminium profiles, sheets of treated particleboard or MDF and insulation. The combined structure forms a panel that has a total thickness of 100-120mm and depending on the insulation material ensures a soundproof resistance of 40-57dB (decibels).
Stationary end parts with a standard width of 80mm are installed at the ends of the wall.
Because the wall is suspended from the ceiling, it is important for the installation of the wall that the wall is attached to something solid (i.e. concrete ceiling, steel structure, wood beam etc.). Alternatively, the track of the operable wall can be attached to the constructive ceiling using threaded bars and special attachment plates.
The standard colour for the profiles of the operable wall are white (RAL 9010) and the edge profiles of the panels have a naturally anodized finish.

SURFACE TREATMENT
There is a wide variety of panel surface treatments, from which a suitable one can be chosen:

White melamine (standard);
Coloured melamine (RAL and NCS catalogues);
Decorative melamine
Natural veneer
Special solutions (laminate, magnet board, school blackboard, etc.).
As a special solution it is possible to install a glass opening in the centre of the panel. The opening can cover the whole panel, the bottom or the top.
The maximum measurement of the glass is 150mm in from the sides of the panel and 300mm in from the top and bottom of the panel.

DOORS
A pass door may also be installed in the operable wall. The pass door can be installed inside a wall panel, or as a special solution, from floor to ceiling as a full door. In the latter case, the door remains stationary and one edge is always attached to the existing wall.
A standard factory-specified lock, in which the Euro (DIN) core can be used, is installed in the pass door.

PRODUCT INFORMATION:
Thickness: 100-120mm
Weight m²: 35-63 kg/m² depending on the sound insulation
Max height: 4000mm
Panel width: Min 650mm / Max 1320mm
Sound insulation: Rw 40-57dB

WARRANTY 2 years
(Valid when installed by Wallenium Partition Walls)